How can Anchor Bolt be fixed to make it last longer?

As everyone knows, Anchor Bolt is a very common type of embedded fastener bolts, and according to Xiaobian's knowledge, the installation of anchor bolts is also more convenient. After installation, deviation adjustment is generally required. About deviation adjustment of anchor bolts You can read our previous articles, which are all explained in great detail.
Anchor Bolt
The deviation adjustment of anchor bolts is mainly to correct some anchor bolts that are not installed properly. What we are going to say today is what to do if the anchor bolts are damaged. The Anchor Bolt China Exporter is generally used in current construction projects. In order to fix mechanical equipment to concrete or reinforced concrete foundation, anchor bolts are generally used. Once the anchor bolt is damaged, it will directly affect the normal work of the mechanical equipment. If the problem is serious, the device will stop working directly. Once the anchor bolts are damaged, it is difficult to repair them in a short time, so the equipment is difficult to use quickly in a short time. The repair of anchor bolts is extremely difficult to return to normal in a short period of time. Therefore, when designing and making anchor bolts in advance, special attention must be paid to the design and processing of each anchor bolt. Particular attention must be paid to the installation and use of anchor bolts. This generally means that the installation center and height and verticality must meet the design requirements. When using anchor bolts, if you find any abnormal vibration of the equipment, you must find out the cause in advance and eliminate the fault before operating.
How can Anchor Bolt be fixed to make it last longer?
1. First of all, it is necessary to connect the bolts of each group of bolts with steel bars.
2. It is necessary to ensure that the lower part of the screw can be connected with the reinforcement of the root reinforcement as much as possible, so as to ensure the accuracy of the anchor bolt orientation.
3. Make the screw as straight as possible. Use a horizontal ruler to check the straightness of the screw before welding.
4. After the welding operation is completed, loosen the nut on the sleeve plate, so that the bottom of the bolt sleeve plate is about 30mm away from the steel at the root surface. At the same time, place the concrete protective layer block between the bottom of the sleeve plate and the steel bar. Adjust the sleeve to make it as horizontal as possible, and tighten the nut on the upper screw.
5. Determine the orientation of the axis, set the theodolite stand on the axis control point of the anchor bolt to be reviewed, aim the eyepiece at another control point on the far end of the axis, and determine the crosshair base in the eyepiece.
6. The theodolite recheck is necessary for both vertical and horizontal directions. Do not check only one direction and neglect the other direction.
From these several points of reference, we have effectively fixed anchor bolts, making the use of foundation feet longer, and the building quality level is higher.
Our company also has China Screw Spike on sale, welcome to consult.

评论

发表评论

此博客中的热门博文

Tension Clamp Is Important

图片
With the increase of the axle load of the railway locomotive and the improvement of the running speed of the train, as well as the development of the urban rail transit and the subway, the Tension Clamp  is also becoming a key link in the continuous development of the track structure, which is concerned by all the countries. In the general line, the need is about buckle pressure, good elastic spring, to meet the needs of heavy-duty, high-speed lines, while in the viaduct track seamless circuit, in order to reduce the interaction between the rail and the bridge, we have to ensure the elasticity that is enough, if the train goes through, the loss of undercover cushion due to compression caused by the buckle pressure is small, and fasteners of  Railway Fastening System  do not loose. Although it is a small public work device, but it is an important part of the track, because of its large demand, about 7000 per kilometer, its reliability is directly related to the safety...
阅读全文

Pay Attention to Rail Plate Base Pad

图片
As an indispensable part of the railway, the  Rail Plate Base Pad  plays an important role on the railway. If it falls off, which will influence the whole  Railway Fastening System  deeply. In the high-speed railway subgrade, the separation of the slab Rail Plate Base Pad will reduce the track strength. This situation means the stiffness and service life of the track will be reduced directly. It causes the rail plate base pad to crack and disconnects from the lug time. The pressure of the top surface of subgrade increases with the length of abscission. Meanwhile, the trend of increasing is becoming more and more obvious.
阅读全文

Do You Know Heavy Haul Rail?

图片
The first International Heavy Haul Congress in 1978 was held in Perth, Australia. Since the establishment of the International Association of Heavy Haul Transport in 1985, the definition of heavy railroads has evolved with heavy loads and advancing with the time. In 2005, the International Association of Heavy Load Associations proposed a new heavy haul railway standard that required to meet at least two of the following three conditions: 1.train traction quality is not less than 8000t 2.vehicle axle in the vehicle reach or exceed 27t 3.The length of the line is not less than 150 km, the annual freight volume is not less than 40 million tons. We support several types of  Rail Fastening System  to meet the different rail's requirements.
阅读全文